To clean and reuse your bottles, follow these steps:
Step 1: Prepare a large tub and have a bath towel you can lay on your counter to soak up the water.
Step 2: Unscrew the cap from the diffuser.
Step 3: Soak the bottle in a tub of warm, soapy water for 10-15 minutes.
Step 4: Put them in a new tub of warm water combined with a 1/2 cap of non-toxic cleaner and let it soak for 5-10 minutes.
Step 5: Soak the bottle, rinse one last time and let it air dry on a towel until they are completely dry.

• Unplug the machine immediately and discontinue use in the event of smoke or a burning smell
• Do not wrap the adaptor with cloth, paper, or anything that may result to avoid abrasions, cuts, fraying, crimping, and kinking
• Do not disassemble or attempt to self-repair the diffuser, this will void the warranty. Any damage caused by the user does not qualify for replacement by Hydur Fragrances
• Disconnect the diffuser from power adaptor before refilling, cleaning or moving the diffuser
• Clean the sensor with a rubbing alcohol-soaked cotton swab
• Do not use metal objects to clean the sensor; use only a cotton swab or cloth dipped in isopropyl alcohol or a neutral detergent
• Make sure to clean the unit before switching to different scenting oils
• Avoid placing the machine in direct sunlight, close to a refrigerator or fan, or in a hot environment
• When not in use, clean the diffuser and store dry at 0°C—50°C, 5%-95% humidity.

USB cable may not be properly plugged in or your diffuser ran out of battery

• Check if the power is on or off and/or your machine is charged.
• Check if there is Isopropyl Alcohol inside the bottle.

The light indicator flashes repeatedly to indicate charging and will become solid white once its fully charged.

The Sensani includes:

• (1) Sensani Machine
• (1) 80ml Bottle and Isopropyl
• (1) Hydur Eco Pouch
• (1) USB Cable
• (3) Disposable Wicks